Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
* Option/accessory.
120
Trip computer - trip statistics*
Trip statistics from the trip computer can be
shown in the centre console's screen and pro-
vide a graphic overview of fuel consumption.
Function
–
Open the menu system MY CAR (p. 113)
and select
Trip statistics in order to see the
bar chart.
Trip statistics
34
.
Each bar symbolises 1 km or 10 km driven dis-
tance, depending on the scale selected - the bar
at the far right shows the value for the current kil-
ometre or 10 km.
The TUNE knob can be used to change the scale
for each bar between 1 km and 10 km - the cur-
sor at the far right changes position between up
and down depending on the scale selected.
Settings
Different settings can be made in the menu sys-
tem MY CAR -
Trip statistics.
•
Reset when vehicle has been off for
minimum 4h - highlight the box by select-
ing ENTER and go back out of the menu by
selecting EXIT. With this option selected, all
statistics are deleted automatically after fin-
ishing driving and the car has been stationary
for more than 4 hours. The journey statistics
start again from zero the next time the
engine is started.
•
Start new trip - ENTER is used to delete all
previous statistics, back out of the menu by
selecting EXIT. If a new driving cycle shall be
started before 4 hours have elapsed then the
current period must first be deleted manually
with this option.
See also information on Eco guide (p. 70).
Related information
•
Trip computer (p. 114)
•
Trip computer - analogue combined instru-
ment panel (p. 116)
•
Trip computer - digital combined instrument
panel (p. 118)
34
The figure is schematic - layout may vary depending on updated software and market.
Loading ...
Loading ...
Loading ...