Loading ...
Loading ...
Loading ...
27
Configuration Setup e Conguration Setup page allows you to dene up to six dierent speaker
congurations. Touch the button for the specic conguration you want to set
up to open its conguration setup menu. e page contains buttons for naming
the conguration and enabling balanced (XLR) and/or single-ended (RCA)
outputs for Main, Aux and Subwoofer channels. Choosing a subwoofer output
causes a Bass Management button to appear. e same menu is used to set up
each conguration.
Configuration Name As with naming sources, press the Conguration Name button to access the
keyboard used for customizing the conguration name. Remember to press Enter
after making your changes to save the new name.
Configure Outputs Choose the output connectors you want enabled with this conguration. If a
subwoofer (or two) is used, a Bass Management button appears, allowing you to
set crossover frequency and slope, or enable stereo or two mono subwoofers.
If you also want to High-Pass Filter the L&R outputs, check the box for L/R
HP Filter. e crossover will pass the higher frequencies and correctly direct
the low frequencies to the subwoofer(s) based on your frequency and slope
settings. If this box is unchecked, L&R channel signals pass full range and the
lower frequencies are duplicated by the subwoofer(s). is may result in too
much bass, especially at certain frequencies, so equalization may be required to
compensate.
Loading ...
Loading ...
Loading ...