Loading ...
Loading ...
Loading ...
English - 30
Sound off
The Sound Off function can be selected during all courses. When this function is selected, sound
is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is
retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function. The “Sound Off” will be lit when this
feature is activated.
Delay end
You can set the washing machine to fi nish your wash automatically at a later time, choosing a
delay of max 24 hours (in 1 hour increments). The hour displayed indicates the time at which the
wash will be fi nished
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will begin
counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine
on again.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button
convenience.
By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The
“My Cycle” light goes on, indicating activation. You can select all options as follows in “My Cycle”
mode.
1. Select the cycle using the Cycle Selector dial.
2. After cycle selection, set each option.
See the “cycle chart” on page 67 for available option settings with each cycle.
3. Start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode.
The washer will display the cycle and options you selected the next time you choose “My Cycle”.
You can change the “My Cycle” settings by repeating the same process above.
The washer displays the last settings used the next time you choose “My Cycle”.
• When you hold down the My Cycle button for 3 seconds or longer, the My Cycle Save mode
is activated, and the My Cycle Save alarm beeps.
• When you press and release the My Cycle button for less than 3 seconds, the My Cycle
Load mode is activated, and the My Cycle Load alarm beeps.
• When the My Cycle Save mode is activated, the indicators of the selected cycle and
functions will blink for 3 seconds. If you change the cycle or any functions while the indicators
are blinking, the blinking stops and the indicators light up.
washing a load of laundry
YUKON-WIFI-03073U-03_EN.indd Sec5:30YUKON-WIFI-03073U-03_EN.indd Sec5:30 2016-04-11 6:36:272016-04-11 6:36:27
Loading ...
Loading ...
Loading ...