Loading ...
Loading ...
Loading ...
Frequently Asked Questions
85
Problem Possible cause and solution
Loud noises are heard
during the descaling
program.
This is not a fault.
These noises occur when water is flushed through
the machine at a high pressure.
Please wait or Preheating is
permanently visible in
the display. No drinks
can be prepared.
Main Water: On is probably selected and the coffee
system is not connected to the water supply.
Fill the water tank.
Then check the water setting (see "Settings - Main
water").
The display lights up
but the coffee system
does not heat up and no
drinks are made.
The Demo mode of the coffee system has been acti-
vated.
Deactivate the Demo mode (see "Settings - Demo
mode").
The drinking vessel be-
ing used is repeatedly
not recognized by the
automatic dispenser
adjustment.
The main dispenser
lowers until it touches
the top of the cup or
glass and cup protec-
tion switch-off is acti-
vated.
The cup or glass is not suited for the sensing mecha-
nism.
Use cups or glasses that are suitable for automatic
dispenser adjustment.
There is a fault with the automatic dispenser adjust-
ment.
Turn the machine off with the On / Off button.
Wait for 2 minutes before turning it back on again.
Use another drinking vessel and prepare a drink.
If cup protection switch-off is activated again or
the main dispenser lowers until it touches the top
of the cup or glass again, please contact Miele.
Cup protection switch-
off does not work. The
main dispenser lowers
until it touches the top
of the vessel and the
cleaning container or
another vessel gets
caught between the
main dispenser and the
drip tray.
If the cleaning container is sitting too close to the
panel behind the main dispenser, or even touches it,
the rim of the container will not be properly recog-
nized by the automatic dispenser adjustment.
Move the cleaning container forwards a little.
Loading ...
Loading ...
Loading ...