Loading ...
Loading ...
Loading ...
NOTE
• Before you connect the foot control to the
docking station, make sure that the docking
station is neither connected to the computer
nor to the power outlet, as otherwise the foot
control might not be detected.
• Recording and playback of dictations with a
Philips foot control requires dictation software
such as Philips SpeechExec to be installed on
the computer. When third-party dictation soft-
ware other than Philips SpeechExec is used,
driver software must be installed before con-
necting the SpeechOne and the foot control.
• For best recording results during hands-free
dictation, you will probably have to adjust the
recording volume. You can set the recording
volume in the audio settings of your recording
application, e.g. Philips SpeechExec dictation
software or Dragon NaturallySpeaking speech
recognition software.
To connect a foot control for hands-free dictation:
1. Connect a Philips ACC2300 series foot control to the
docking station of your SpeechOne.
2. Connect the docking station to your computer.
Button assignment of Philips foot controls
Foot control ACC2310 / ACC2320
The Philips foot controls 2310 and 2320 have three pedals.
By default, the foot controls 2310 and 2320 have the fol-
lowing conguration:
ACC2310
ACC2320
Foot control ACC2330
The Philips foot control 2330 has four pedals. By default,
the foot control 2330 has the following conguration:
ACC2330
Upgrading the rmware
Your device is controlled by an internal program called rm-
ware. As a part of ongoing product maintenance, the rm-
ware is upgraded and errors are corrected.
It is possible that a newer version (an ‘update’) of the rm-
ware has been released since you purchased the device. In
this case, you can easily update your device to the latest
version.
Use SpeechControl (Philips Device Control Center) to up-
grade the rmware of your device. You can download the
latest version of the application here: https://www.dicta-
tion.philips.com/speechcontrol. Please follow the steps
outlined below to upgrade your device.
NOTE
A rmware upgrade is only possible if the follow-
ing preconditions are met:
• At least two battery LEDs on the docking sta-
tion must be glowing (which means the
SpeechOne has at least 2.5 hours battery pow-
er left).
• The SpeechOne is not in Idle mode.
• Ideally, the SpeechOne is placed on the dock-
ing station.
• There is no recording or playback running.
To upgrade your device:
20
Loading ...
Loading ...
Loading ...