Loading ...
Loading ...
Loading ...
3. Get started
CAUTION
Before you connect your SpeechOne, rst read
the safety instructions (see Safety instructions
[3]).
Charging the battery
Charge the built-in battery before you use the device for
the rst time or if you haven’t used it for an extended time
period.
If the battery is completely discharged and your device
turns o, allow the battery to charge for a while before
you turn on the device.
A complete recharge cycle takes about two hours.
The device should be charged every 6 months even when
not used, to prevent the battery from completely draining
(deep discharge).
Charge via docking station
NOTE
If you charge your device via docking station,
make sure that the micro USB connector is con-
nected to the USB port for charging marked with
5V DC.
X During charging, the battery LEDs on the docking station
subsequently light up in a loop until the headset is either
removed or fully charged.
X When charging is complete, all three battery LEDs on the
docking station glow white.
CAUTION
Make sure that there are no metallic parts on the
docking station, otherwise the charging process is
not possible.
Charge via computer
Before you charge the battery via computer, make sure that
your computer is turned on.
NOTE
Recording is not possible if only your SpeechOne
is connected to the computer. To make a record-
ing, you also need to connect the docking station
to the computer.
11
Loading ...
Loading ...
Loading ...