Loading ...
Loading ...
Loading ...
en Steam
18
Setting the timer
The timer runs alongside other settings. You can set it
at any time, even if the appliance is switched off. It has
its own audible signal so that you can tell whether it is
the timer or a cooking time which has elapsed.
Adjusting settings
The timer duration always starts at zero minutes.
The higher the value, the greater the time steps when
setting the timer.
The maximum setting is 24 hours.
1. Touch the t field.
The symbol lights up red. On the display, the timer
duration is shown in white and in focus.
2. Set the timer duration using the rotary selector.
3. Press the t field to start.
Note: After a few seconds, the timer also starts
automatically.
The timer duration counts down.
The timer remains visible on the display if the appliance
is switched off. When an operation is running, the
settings for this operation are shown in the foreground.
When you touch the t field, the timer duration is
displayed for a few seconds.
When the timer duration comes to an end, an audible
signal sounds and a note appears on the display. The
symbol is no longer lit up.
Tip: If the set timer duration relates to the appliance
operation, use the cooking time. The time is visible in
the foreground and the appliance switches off
automatically.
Changing and cancelling
To change the timer duration, touch the t field. The
timer duration is displayed in white and in focus, and
can be changed by using the rotary selector.
If you want to cancel the timer, reset the timer duration
to zero. Once the change has been applied, the symbol
is no longer lit up.
`Steam
St e a m
With some heating modes, you can prepare food with
steam assistance. In addition, the Dough proving and
Reheat heating modes are available.
:Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Noise
Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.
Steam baking – Steam-assisted cooking
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
■ Becomes crispy on the outside
■ Develops a shiny surface
■ Is succulent and tender on the inside
■ Only undergoes a minimum reduction in volume
You set the type of heating and steam intensity
combination that you want. Use the information in the
tables to select a suitable type of heating and steam
intensity, or select a programme.
Steam intensity
Different intensity levels are available when adding
steam:
Suitable types of heating
You can switch on steam assistance for these types of
heating:
■ 4D hot air <
■ Top/bottom heating %
■ Hot air grilling 7
■ Keeping warm O
Intensity Setting
Low 01
Medium 02
High 03
Steam en
19
Setting
Before applying the settings, fill up the water reservoir.
1. Select a suitable type of heating and temperature.
2. Touch the S field.
The steam level will be highlighted in white next to
the temperature on the display.
3. Turn the rotary selector to set the steam level.
4. Press the l Start/Stop button to start.
The appliance begins to heat up.
Note: If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank. The operation
continues without adding steam.
Changing and cancelling
To change the steam level, touch the S symbol. The
steam level will be highlighted in white, and can be
changed using the control ring. The change will be
applied immediately.
If you want to cancel steam assistance, touch the
S symbol again. The appliance will continue to operate,
but steam will not be injected into the cooking
compartment.
Reheating
With the "Reheating U" type of heating, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
Note: If the water tank runs dry during the operation
with the Reheating setting, the operation is interrupted.
Fill the water tank.
Setting
A cooking time must always be set for the steam
heating types.
Before applying the settings, fill up the water reservoir.
1. Set the type of heating.
2. Touch the } field.
The temperature is highlighted in white in the
display.
3. Turn the rotary selector to set the temperature.
4. Touch the s field.
The cooking time is highlighted in white in the
display.
5. Turn the rotary selector to set the cooking time.
6. Press the l Start/Stop button to start.
The cooking time counts down in the display.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating up. The cooking
time 00 m 00 s is shown on the display.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Change
After starting the appliance, the temperature remains
highlighted. When you move the rotary selector, the
temperature is changed and applied immediately.
Touch the s symbol and turn the control ring to change
the cooking time. The change is applied immediately.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button.
Note: When you change the type of heating, the other
settings will also be reset.
Dough proving setting
Dough will prove considerably more quickly using the
"Dough proving T" type of heating than at room
temperature and does not dry out.
Use the information in the tables to select the
appropriate setting. ~ "Tested for you in our cooking
studio" on page 35
Note: If the water tank runs dry during the operation
with the Dough proving setting, the operation is
interrupted. Fill the water tank.
Setting
A cooking time must always be set for the steam
heating types.
Before applying the settings, fill up the water reservoir.
1. Set the type of heating.
2. Touch the } field.
The temperature is highlighted in white in the
display.
3. Turn the rotary selector to set the temperature.
4. Touch the s field.
The cooking time is highlighted in white in the
display.
5. Turn the rotary selector to set the cooking time.
6. Press the l Start/Stop button to start.
The cooking time counts down in the display.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating up. The cooking
time 00 m 00 s is shown on the display.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Change
After starting the appliance, the temperature remains
highlighted. When you move the rotary selector, the
temperature is changed and applied immediately.
Touch the s symbol and turn the control ring to change
the cooking time. The change is applied immediately.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button.
Note: When you change the type of heating, the other
settings will also be reset.
Filling the water tank
The water tank is located behind the control panel.
Before starting an operation with steam, open the
control panel and fill the water tank with water.
Make sure that you have set the water hardness range
correctly. ~ "Basic settings" on page 22
Loading ...
Loading ...
Loading ...