Loading ...
Loading ...
Loading ...
MK LIT (E5) 01/2021 page 18/172
2.2 General requirements for the chamber load
Observe the specification and safety instructions depending on the tests to be performed:
• Requirements for the chamber load for tests with EUCAR hazard level up to max. 3 (chap. 2.3.1)
• Requirements for the chamber load for tests with EUCAR hazard level 4 to 6 (chap. 2.4.1)
Any solvent must not be explosive and flammable. A mixture of any component of the charging material
with air must NOT be explosive. The operating temperature must lie below the flash point or below the
sublimation point of the charging material. Any component of the charging material must NOT be able to
release toxic gases.
The charging material shall not contain any corrosive ingredients that may damage the machine compo-
nents made of stainless steel, aluminum, and copper. Such ingredients include in particular acids and hal-
ides. Any corrosive damage caused by such ingredients is excluded from liability by BINDER GmbH.
Contamination of the chamber by toxic, infectious or radioactive substances must be prevented
WARNING
Danger of intoxication and infection through contamination of the chamber with
toxic, infectious or radioactive substances.
Damages to health.
Protect the interior of the chamber from contamination by toxic, infectious or radioactive
substances.
Take suitable protective measures when introducing and removing toxic, infectious or
radioactive material
In case of foreseeable use of the chamber there is no risk for the user through the integration of the chamber
into systems or by special environmental or operating conditions in the sense of EN 61010-1:2010. For this,
the intended use of the chamber and all its connections must be observed.
2.3 Tests with EUCAR hazard level up to max. 3
2.3.1 Requirements for the chamber load
ONLY lithium-ion batteries are permitted for aging and performance tests on cells, modules, and battery
systems. Do NOT insert other types of battery, such as lead batteries, into the chamber.
Cells, modules, and battery systems may be inserted into the chamber.
Loading ...
Loading ...
Loading ...