Binder LIT MK 720 MK 720-liter dynamic climate chambers for rapid temperature changes

User Manual - Page 173

For LIT MK 720.

PDF File Manual, 173 pages, Read Online | Download pdf file

More photos

1. Safety
- 1.1 Personnel Qualification
- 1.2 Operating manual
- 1.3 Legal considerations
- 1.4 Structure of the safety instructions
- 1.5 Localization / position of safety labels on the chamber
- 1.6 Type plate
- 1.7 General safety instructions
2. Intended use
- 2.1 Use
  - 2.1.1 EUCAR Hazard levels â Overview
- 2.2 General requirements for the chamber load
- 2.3 Tests with EUCAR hazard level up to max. 3
  - 2.3.1 Requirements for the chamber load
  - 2.3.2 Operation with the max. Expectation of an EUCAR event with hazard level 3
- 2.4 Tests with EUCAR hazard level 4 to 6
- 2.5 Medical devices
- 2.6 Personnel Requirements
- 2.7 Installation site requirements and ambient conditions
3. Foreseeable Misuse
4. Residual Risks
5. Operator responsibility, documentation, and measures
- 5.1 Risk assessment
- 5.2 Employee training and protocols
- 5.3 Operating instructions
- 5.4 Protective equipment
- 5.5 Standard Operating Procedures (SOPs)
- 5.6 Testing and maintenance
- 5.7 System logbook
- 5.8 Operation log
6. Testing
- 6.1 Objective of testing
- 6.2 Scope of the tests
- 6.3 Proof of tests
7. Chamber description
- 7.1 Manufacturer's safety plan: Protective measures and equipment
- 7.2 Chamber overview
- 7.3 Safety module on the right side of the chamber
- 7.4 Lateral control panel
- 7.5 Rear power switch
- 7.6 Instrument panel
- 7.7 Rear chamber view
- 7.8 Gas detection
- 7.9 CO2 fire suppression device (can be triggered automatically and manually)
  - 7.9.1 Automatic triggering of the CO2 fire suppression device
  - 7.9.2 After triggering of the CO2 fire suppression device
- 7.10 Mechanical door lock
- 7.11 Exhaust port with reversible pressure relief flap
8. Completeness of delivery, transportation, storage, and installation
- 8.1 Unpacking, and checking equipment and completeness of delivery
- 8.2 Guidelines for safe lifting and transportation
- 8.3 Storage
- 8.4 Location of installation and ambient conditions
9. Installation and connections
- 9.1 Connecting the CO2 pressurized gas cylinder
- 9.2 Inertization connections for customer systems
- 9.3 Installation of the voltage and frequency changer (chambers with voltage and frequency changer)
- 9.4 Electrical connection
  - 9.4.1 Information on connecting the battery test chamber
  - 9.4.2 Connecting the voltage and frequency changer (for chambers equipped with a voltage and frequency changer)
10. Functional overview of the MB2 chamber controller
- 10.1 Operating functions in normal display
- 10.2 Display views: Normal display, program display, chart-recorder display
- 10.3 Controller icons overview
- 10.4 Operating modes
- 10.5 Controller menu structure
- 10.6 Principle of controller entries
- 10.7 Performance during and after power failures
- 10.8 Performance when opening the door
11. Commissioning
- 11.1 Preparing and activating the general safety devices
- 11.2 Commissioning an operator-provided inertization
- 11.3 Handling the safety devices during operation
- 11.4 Turning on the chamber
- 11.5 Controller settings upon start up
12. Set-point entry in âFixed valueâ operating mode
- 12.1 Set-point entry through the âSetpointsâ menu
- 12.2 Direct setpoint entry via Normal display
- 12.3 Special controller functions via operation lines
13. Notification and alarm functions
- 13.1 Alarms via indicator light with integrated buzzer
  - 13.1.1 Connections and forwarding of notifications and alarms to customer systems
- 13.2 Notification and alarm messages overview on the MB2 chamber controller
14. Behavior when/after triggering of the CO2 fire suppression device
15. Temperature safety devices
- 15.1 Over temperature protective device (class 1)
- 15.2 Temperature limiter class 2
- 15.3 Overtemperature safety controller (adjustable temperature limiter class 2
- 15.4 Over/under temperature safety device class 2 (option)
16. Timer program: stopwatch function
- 16.1 Starting a timer program
  - 16.1.1 Performance during program delay time
- 16.2 Stopping a running timer program
  - 16.2.1 Pausing a running timer program
  - 16.2.2 Cancelling a running timer program
- 16.3 Performance after the end of the program
17. Time programs
- 17.1 Starting an existing time program
  - 17.1.1 Performance during program delay time
- 17.2 Stopping a running time program
  - 17.2.1 Pausing a running time program
  - 17.2.2 Cancelling a running time program
- 17.3 Performance after the end of the program
- 17.4 Creating a new time program
- 17.5 Program editor: program management
  - 17.5.1 Deleting a time program
- 17.6 Section editor: section management
- 17.7 Value entry for a program section
18. Week programs
- 18.1 Starting an existing week program
- 18.2 Cancelling a running week program
- 18.3 Creating a new week program
- 18.4 Program editor: program management
  - 18.4.1 Deleting a week program
- 18.5 Section editor: section management
- 18.6 Value entry for a program section
19. User management
- 19.1 Authorization levels and password protection
- 19.2 Log in
- 19.3 Log out
- 19.4 User change
- 19.5 Password assignment and password change
- 19.6 Activation code
20. General controller settings
- 20.1 Selecting the controllerâs menu language
- 20.2 Setting date and time
- 20.3 Selecting the temperature unit
- 20.4 Display configuration
  - 20.4.1 Adapting the display parameters
  - 20.4.2 Touchscreen calibration
- 20.5 Network and communication
- 20.6 USB menu: Data transfer via USB interface
- 20.7 Turning off the interior lighting automatically
21. General information
- 21.1 Service contact page
- 21.2 Current operating parameters
- 21.3 Event list
- 21.4 Technical chamber information
22. Chart recorder display
- 22.1 Views
- 22.2 Setting the parameters
23. Notes on refrigerating operation
24. Anti-condensation protection via operation line
25. Zero-voltage switching outputs via operation lines
26. Options
- 26.1 APT-COMâ¢ 4 Multi Management Software (option)
  - 26.1.1 APT-COMâ¢ 4 Basic Edition
- 26.2 RS485 interface (option)
- 26.3 Data logger kit (option)
- 26.4 Analog outputs for temperature (option)
- 26.5 Object temperature display with flexible Pt 100 temperature sensor (option)
- 26.6 Compressed air connection (option)
27. Cleaning and decontamination
- 27.1 Cleaning the battery test chamber following normal operation
- 27.2 Cleaning the battery test chamber after triggering of the CO2 fire suppression device
- 27.3 Decontamination / chemical disinfection
28. Maintenance: inspection, maintenance, troubleshooting, repair, testing
- 28.1 General information, personnel qualification
- 28.2 Maintenance intervals, service
- 28.3 Inspections
- 28.4 Simple troubleshooting
- 28.5 Sending the chamber back to BINDER GmbH
29. Disposal
- 29.1 Disposal of the transport packing
- 29.2 Decommissioning
- 29.3 Disposal of the chamber in the Federal Republic of Germany
- 29.4 Disposal of the chamber in the member states of the EU except for the Federal Republic of Germany
- 29.5 Disposal of the chamber in non-member states of the EU
30. Technical description
- 30.1 Factory calibration and adjustment
- 30.2 Over-current protection
- 30.3 Definition of usable volume
- 30.4 Technical data
- 30.5 Equipment and options (extract)
- 30.6 Accessories and spare parts (extract)
- 30.7 Dimensions
31. Certificates and declarations of conformity
- 31.1 EU Declaration of Conformity
- 31.2 Certificate for the GS mark of conformity of the âDeutsche Gesetzliche Unfallversicherung e.V.â (German Social Accident Insurance) DGUV
- 31.3 Safety concept certificate from TÃV SÃ¼d
32. Contamination clearance certificate
- 32.1 For chambers located outside the USA and Canada
- 32.2 For chambers located in the USA and Canada
Leere Seite

Loading ...

File type: PDF

File name: 75207361_lit-mk-720.pdf

File size: 8.04 MB

File Language: English

Pages: 173

Author: Binder

Published: 2021-08-19

Updated: 2023-05-22

Download File