Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 59
(Continued)
maximum temperature settings for best
windshield and side window defrosting and
defogging. When toggling the Front Defrost
mode button, the climate system will return to
the previous setting.
Rear Defrost Button
Press and release the button on the
touchscreen, or push and release the
button on the faceplate, to turn on the
rear window defroster and the heated
outside mirrors (if equipped). The Rear Defrost
indicator illuminates when the rear window
defroster is on. The rear window defroster
automatically turns off after 10 minutes.
Driver And Passenger Temperature
Buttons
These buttons provide the driver and passenger
with independent temperature control.
Push the Up button on the faceplate
or press and slide the temperature
bar towards the red arrow button on
the touchscreen for warmer
temperature settings.
Push the Down button on the
faceplate or press and slide the
temperature bar towards the blue
arrow button on the touchscreen for
cooler temperature settings.
SYNC Button
Press the SYNC button on the
touchscreen to toggle the SYNC
feature on/off. The SYNC indicator
illuminates when SYNC is on. SYNC is
used to synchronize the front passenger
temperature and rear passenger temperature,
mode, and blower settings with the driver
temperature, mode, and blower settings.
Changing the front passenger temperature or
rear passenger temperature, mode, and blower
settings while in SYNC will automatically exit
this feature.
NOTE:
The SYNC setting is only available on the touch-
screen.
Blower Control
Blower Control is used to regulate the
amount of air forced through the
Climate Control system. There are
seven blower speeds available.
Adjusting the blower will cause automatic mode
to switch to manual operation. The speeds can
be selected using either the blower control knob
on the faceplate or the buttons on the
touchscreen.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild
washing solution, wiping parallel to the
heating elements. Labels can be peeled off
after soaking with warm water.
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the
window.
CAUTION! (Continued)
2
21_WD_OM_EN_USC_t.book Page 59
Loading ...
Loading ...
Loading ...