Loading ...
Loading ...
Loading ...
en Troubleshooting
32
Fault Cause and troubleshooting
Display flashes. Appliance door is not closed properly.
▶
Close the appliance door.
‒ Arrange the tableware so that no parts project beyond the basket and pre-
vent the appliance door from closing properly.
18.5 Malfunctions
Fault Cause and troubleshooting
Water is left in the appliance at
the end of the programme.
Filter system or area under the filters is blocked.
1.
Clean the "Filters" →Page24.
2.
Clean the "Wastewater pump" →Page33.
Programme has not yet ended.
▶
Wait until the programme ends or cancel the programme with reset.
▶
→"Terminate programme", Page22
Appliance cannot be switched on
or operated.
Appliance functions have failed.
1.
Pull out the mains plug or switch off the fuse.
2.
Wait at least 2minutes.
3.
Connect the appliance to the power supply.
4.
Switch the appliance on.
Appliance does not start. The mains fuse has tripped.
▶
Check the relevant fuse.
Mains cable is not inserted.
1.
Check whether the socket works.
2.
Check whether the mains cable is properly inserted in the socket and on the
rear of the appliance.
Appliance door is not closed properly.
▶
Close the appliance door.
Programme starts automatically. You did not wait until programme ended.
▶
→"Terminate programme", Page22
Appliance stops during the pro-
gramme or cuts out.
Appliance door is not closed properly.
▶
Close the appliance door.
Power and/or water supply has been interrupted.
1.
Check the power supply.
2.
Check the water supply.
Top basket is pressing against inner door and preventing appliance door from
being closed securely.
▶
Check whether the rear panel of the appliance is being pressed in by a
socket or hose holder that has not been removed.
▶
Arrange the tableware so that no parts project beyond the basket and pre-
vent the appliance door from closing properly.
18.6 Mechanical damage
Fault Cause and troubleshooting
Appliance door cannot be
closed.
Door lock has been activated.
▶
Close the appliance door with greater force.
Door cannot be closed due to installation method.
▶
Check whether the appliance has been installed properly.
When closed, the appliance door, its decor or attached parts should not
knock against adjacent cabinets or the worktop.
Lid on the detergent dispenser
cannot be closed.
Detergent dispenser or lid are blocked by sticky detergent residue.
▶
Remove detergent residue.
Loading ...
Loading ...
Loading ...