Loading ...
Loading ...
Loading ...
Troubleshooting en
31
Fault Cause and troubleshooting
Removable streaks are present
on glasses, glassware with a
metallic appearance and cutlery.
Detergent residue is present in the final rinse. Lid of the detergent dispenser is
blocked by tableware items and will not open fully.
1.
Arrange tableware in the top basket tableware so the tab collecting tray is
not obstructed by tableware.
→"Arrange tableware", Page20
Items of tableware are blocking the dispenser lid.
2.
Do not place tableware or fragrance dispensers in the tablet collecting tray.
Tableware has been precleaned too intensely. The sensors chose a weaker pro-
gramme. Stubborn soiling cannot be entirely removed.
▶
Only remove large remnants of food and do not prerinse tableware.
▶
Adjust the sensitivity of the sensors.
Irreversible clouding of glass-
ware.
Glasses are not dishwasher-proof, only suitable for dishwashers.
▶
Use dishwasher-proof glasses.
▶
Avoid a lengthy steam phase (standing time after wash cycle ends).
▶
Use a programme with a lower temperature.
▶
Set the softening system to the water hardness.
▶
Use detergent with a glass protection component.
Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely af-
fected.
▶
Use rust-resistant tableware.
Cutlery may also rust if washed together with rusting items.
▶
Do not wash rusting items.
Salt content in washing water is too high.
1.
Remove any spilled special salt from the tub.
2.
Screw the cap of the special salt dispenser on tight.
Detergent residue is present in
the detergent dispenser or the
tablet collecting tray.
Spray arms were blocked by tableware so detergent was not rinsed out.
▶
Check that the spray arms are not blocked and can rotate freely.
Detergent dispenser was damp when detergent was added.
▶
Only add detergent to a detergent dispenser when dry.
Excessive formation of foam oc-
curs.
Hand washing-up liquid is present in dispenser for rinse aid.
▶
Immediately add rinse aid to the dispenser.
→"Adding rinse aid", Page18
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care product used causes excessive foaming.
▶
Change the brand of detergent.
18.4 Information on display panel
Fault Cause and troubleshooting
Special salt refill indicator lights
up.
Insufficient special salt.
▶
Add "Special salt" →Page17.
Sensor does not detect special salt tablets.
▶
Do not use special salt tablets.
Refill indicator for special salt
does not light up.
Water softening system is switched off.
▶
"Setting water softening system" →Page16
Refill indicator for rinse aid lights
up.
Insufficient rinse aid.
1.
Add "Rinse aid" →Page18.
2.
Set the amount of rinse aid to be dispensed.
Refill indicator for rinse aid does
not light up.
Rinse aid system is switched off.
▶
→"Setting the amount of rinse aid", Page18
Loading ...
Loading ...
Loading ...