Loading ...
Loading ...
Loading ...
en Basic settings
22
▶
Press the button for the relevant additional function.
→"Additional functions", Page12
a The additional function is set and the additional
function button flashes.
15.5 Setting timer programming
You can delay the start of the programme by up to
24hours.
1.
Press .
a "h:01" appears in the display.
2.
Use or to set the required start time for the pro-
gramme.
3.
Press .
a This activates timer programming.
Tip:To deactivate timer programming, press or
repeatedly until "h:00" appears in the display.
15.6 Starting the programme
▶
Press .
a The programme has ended when the display shows
"0:00".
Notes
¡ If you want to add more tableware while the appli-
ance is running, do not use the tablet collecting tray
as a handle for the top basket. You might touch the
partially dissolved tablet.
¡ You can only change a programme when running if
you cancel it.
→"Terminate programme", Page22
¡ The appliance switches off automatically 1minute
after the end of the programme to save energy. If
you open the appliance door immediately after the
programme has ended, the appliance will switch off
after 4 seconds.
15.7 Interrupting programme
Note:When you open the appliance door once the ap-
pliance has heated up, leave the door slightly ajar for a
few minutes and then close it. This will help prevent ex-
cess pressure building up in the appliance and stop
the appliance door bursting open.
1.
Press .
a The programme is saved and the appliance
switches off.
2.
Press to resume the programme.
15.8 Terminate programme
To end a programme early or to switch from a pro-
gramme that has already started, you will need to can-
cel it first.
1.
Open the appliance door.
2.
Press for approx. 3seconds.
3.
Close the appliance door.
a The programme is cancelled and ends after approx.
1minute.
15.9 Switching off appliance
1.
Please note the information on "Safe use"
→Page5.
2.
Press .
3.
To prevent damage from dripping water, turn the
water tap off tight (not applicable to appliances with
Aqua-Stop).
Tip:If you press during the wash cycle, the pro-
gramme currently running will be interrupted. When you
switch the appliance back on, the programme contin-
ues automatically.
16 Basic settings
You can configure the appliance to meet your needs.
16.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Display text Selection Description
Water hardness H:04
1
H:00 - H:07 Set the water softening system to your wa-
ter hardness.
→"Setting water softening system",
Page16
Level H:00 switches the water softening
system off.
Rinse aid dispensing r:05
1
r:00 - r:06 Set the amount of rinse aid to be dis-
pensed.
→"Setting the amount of rinse aid",
Page18
Switch the rinse aid system off with level
r:00.
1
Factory setting (may vary according to model)
Loading ...
Loading ...
Loading ...