Loading ...
Loading ...
Loading ...
SmegConnect
33
EN
5. Wait for the welcome screen to appear.
The “ACCESS POINT CHANGE
COMPLETED SUCCESSFULLY!” screen
appears on the display of the appliance.
The CONNECTIVITY icon (in the
information area at the top right) remains on
steadily. The change Access Point
procedure has been completed.
The SETTINGS menu now appears on
the appliance’s display for remote control
to be activated.
2.6 SmegConnect Menu
This menu allows you to display some
technical information about the connection:
• Cloud: Cloud connection status (Not
connected/Connected).
• Wi-Fi: Access Point connection status
(not connected or the strength of the
signal when connected).
• Access Point SSID: name of the Wi-Fi
network.
• IPv4 network address: IPv4 address of
the connectivity card.
• IPv6 network address: IPv6 address of
the connectivity card.
• MAC address: MAC address of the
connectivity card.
• Wi-Fi FW release: Firmware version of
the connectivity card.
• SW Compliance ID: identification of
compliance with the essential
requirements of the RED directive.
During this phase, the mobile
device automatically reconnects to
the Wi-Fi network or the initial data
network. No action is required by
the user.
Make sure that you activate the
Remote Control in order to control
the appliance via the App.
This information may be useful when
requesting assistance.
Loading ...
Loading ...
Loading ...