SEATED LEG CURL-EXTENSION User Manual

Loading ...

3. Slide  collar and roller pad assembly onto the kicker assembly.

Item Description Qty.

1 Detent  1

2  Collar 1

3 Kicker Assembly 1

4 Roller Pad Assembly 1

5 Retainer Plate 1

6 Bearing Housing Cap with Hole 1

7 Detent Pin Assembly 1

4. Place retainer plate and bearing housing cap over the detent pin assembly and thread the detent pin assembly into the kicker

assembly.

5. Tighten set screws in the  collar to 8-10  (10.8-13.5 Nm) using a 4mm Allen wrench.

6. Install screw and washer securing the kicker assembly to the work arm assembly using a 7mm Allen wrench.

Item Description Qty.

1 Kicker Assembly 1

2 Work Arm Assembly 1

3 Screw, M10 x 1.5, 30mm Low Head 1

4 Washer, 3/8" ID x 1.25" OD 1

Tighten hardware to 20-25  (27.1-33.9 Nm).

7. Slide  collar and roller pad assembly onto the thigh pad assembly.

Item Description Qty.

1 Roller Pad Assembly 1

2 Thigh Pad Assembly 1

3  Collar 1

4 Roller Pad Plate 1

5 Screw, M10 x 1.5, 35mm 1

6 Bearing Housing Cap 1

Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).

Install screw and plate securing the roller pad assembly to the thigh pad assembly using an 8mm Allen wrench.

9. Install bearing housing cap to the roller pad assembly using a rubber mallet.

10. Tighten set screws in the  collar to 8-10  (10.8-13.5 Nm) using a 4mm Allen wrench.

Page 29 of 40

Loading ...

Cybex SEATED LEG CURL-EXTENSION Ion Dual Stations