Loading ...
Loading ...
Loading ...
3. Install screws, washers, and locknuts securing the pivot boom assembly to the main frame assembly using an 8mm Allen wrench
and 17mm wrench.
Item Description Qty.
1 Pivot Boom Assembly 1
2 Main Frame Assembly 1
3 Screw, M10 x 1.5, 30mm 4
4 Washer, Flat 3/8" 8
5 Nut, M10 x 1.5, Hex Nylock 4
Tighten hardware to 20-25 (27.1-33.9 Nm).
4. Install hole plugs to the main frame assembly using a rubber mallet.
Item Description Qty.
1 Main Frame Assembly 1
2 Hole Plug, 1" 4
5. Install screws, washers, and locknuts securing the bottom cross brace to the tower frame using an 8mm Allen wrench and 17mm
wrench.
Item Description Qty.
1 Bottom Cross Brace 1
2 Tower Frame 1
3 Screw, M10 x 1.5, 110mm 2
4 Washer, Flat 3/8" 4
5 Nut, M10 x 1.5, Hex Nylock 2
6 Hole Plug, ½" 2
Hand tighten hardware.
6. Install hole plugs to the tower frame.
Page 13 of 40
Loading ...
Loading ...
Loading ...