Loading ...
Loading ...
Loading ...
8. Install screws and washers securing the cable retainer service plate to the cam detent plate using a Phillips screwdriver.
Item Description Qty.
1 Cable Retainer Service Plate 1
2 Washer, M6 2
3 Screw, M4 x 10mm, Phillips 2
Tighten hardware to 8-10 in-lb (0.9-1.1 Nm).
Install Front and Top Caps
1. Set front shrouds into the bottom cap. Install screws securing the front cap to the tower frame using a 10 mm wrench.
Item Description Qty.
1 Front Cap 1
2 Front Shroud, 1
3 Front Shroud, Right 1
4 Screw, M6, HCS, 50 mm 4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
2. Install screws securing the front cap to the tower frame using a 10 mm socket wrench and ratchet.
NOTE: Screw heads can be accessed from the top or bottom.
Item Description Qty.
1 Front Cap 1
2 Screw, M6, HCS, 50 mm 4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
3. Press grommets into holes at the top of the tower frame.
Page 27 of 40
Loading ...
Loading ...
Loading ...