Loading ...
Loading ...
Loading ...
Install Cam and Work Arms
1. Slide pivot into the pivot boom assembly.
2. Install screw and washer securing the pivot to the pivot boom assembly using a 7mm Allen wrench.
Item Description Qty.
1 Pivot 1
2 Pivot Boom Assembly 1
3 Washer, Flat 30mm 1
4 Screw, M10 x 1.5, 30mm Low Head 1
Hand tighten hardware.
3. Install screws and nuts securing the cam detent plate and cam weldment to the cam using a 6mm and 7mm Allen wrench.
Item Description Qty.
1 Cam 1
2 Cam Detent Plate 1
3 Cam Weldment 1
4 Screw, M10 x 1.5, 35mm Flat Head 5
5 Nut, M10 x 1.5, Socket Head 5
Tighten hardware to 14-16 (19-21.7 Nm).
Page 22 of 40
Loading ...
Loading ...
Loading ...