SEATED LEG CURL-EXTENSION User Manual

Loading ...

7. Install screws and washers securing the rear cross brace to the tower frame using an 8mm Allen wrench.

Item Description Qty.

1 Rear Cross Brace 1

2 Tower Frame 1

3 Screw, M10 x 1.5, 25mm 4

4 Washer, Flat 3/8" 4

Hand tighten hardware.

8. Install screws, washers, and locknuts securing the main frame assembly to the rear and bottom cross braces using an 8mm Allen

wrench and 17mm wrench.

Item Description Qty.

1 Main Frame Assembly 1

2 Rear Cross Brace 1

3 Bottom Cross Brace 1

4 Screw, M10 x 1.5, 120mm 4

5 Washer, Flat 3/8" 8

6 Nut, M10 x 1.5, Hex Nylock 4

Hand tighten hardware.

9. Tighten the hardware from Steps 5-8 to 20-25  (27.1-33.9 Nm).

10. Install screws, washers, and locknuts securing the  and right handle assemblies to the main frame assembly using an 8mm

Allen wrench and 17mm wrench.

Item Description Qty.

1  Handle Assembly 1

2 Right Handle Assembly 1

3 Screw, M10 x 1.5, 30mm 6

4 Washer, Flat 3/8" 12

5 Nut, M10 x 1.5, Hex Nylock 6

Tighten hardware to 20-25  (27.1-33.9 Nm).

Page 14 of 40

Loading ...

Cybex SEATED LEG CURL-EXTENSION Ion Dual Stations