Loading ...
Loading ...
Loading ...
121
120
DATA-TRANSFER MODE
If a minor problem occurs during printing, such as the paper runs out, follow the
procedure recommended for the printer; no action is required for the camera. If a major
printer error occurs, press the center of the controller to end the routine. Refer to the
printer manual for the correct procedure for the printer problem. Check the printer
settings before starting again and use the USB Direct Print screen to deselect the images
that were printed.
The USB DIRECT PRINT menu DPOF-print option allows JPEG (fine, standard, and
economy) images and an index print selected with the DPOF printing options in the
playback menu to be printed from an Epson USB DIRECT-PRINT compatible printer. See
page 92 on how to create a DPOF file.
Before each print run, check the printer settings; refer to the printer manual. A fully
charged battery should be used when the camera is connected to the printer. The use of
the AC adapter (sold separately) is recommended over the use of the battery.
Printing DPOF files
1
Connect the camera to the printer using the camera’s USB cable.
The larger plug on the cable is connected to the printer. Lift the
rubber cover and insert the smaller plug of the cable into the
camera (1).
Turn the camera on with the mode dial; the dial can be set to any
position. Open the USB DIRECT-PRINT menu. Highlight “Start”
in the DPOF-print option in the DPOF section of the menu. Press
the central button of the controller to begin the routine.
The number of prints in the print run are displayed on the
LCD monitor; index prints are counted as one. Use the
left/right keys to highlight “Yes,” and press the center of the
controller to start printing.
Printing finished.
All frames
Reset
Batch print
Basic
Navigating the USB DIRECT-PRINT menu
When the camera is connected to a compatible printer, the menu button turns the menu
on and off. The left/right and up/down keys of the controller are used to move the cursor
in the menu. Pressing the central button of the controller will enter a setting.
StartDPOF print
DPOF
Batch print selects all JPEG images (fine, standard, and economy) on the memory card
for printing. When the all-frames option is selected, a screen opens so the number of
copies of each image can be specified. Up to nine copies can be printed. The reset option
cancels all changes made to the print selection screen.
After the batch-print option is chosen, the USB DIRECT-PRINT selection screen will
show which images and the number of copies selected. The controller can be used to
edit the print order, see page 119.
DPOF print allows the JPEG images (fine, standard, and economy) and an index print
selected with the DPOF printing options in the playback menu to be printed from an
Epson USB DIRECT-PRINT compatible printer. Simply select the start option from the
menu to begin the routine, see the following page.
Once printing begins, the operation can be canceled by
pressing the center of the controller. The printing finished
message will indicate the end of the operation; turn the
camera off to end the routine.
OK
Notes on printing errors
Print file?
Number of prints: 7
Yes No
Loading ...
Loading ...
Loading ...