Loading ...
Loading ...
Loading ...
119
118
DATA-TRANSFER MODE
USB DIRECT-PRINT allows still images to be printed directly from a compatible Epson
printer. This function prints a single image on one sheet of paper. Index prints and TIFF
images cannot be printed with USB DIRECT-PRINT. To print index prints, see page 121.
Before each print run, check the printer settings; refer to the printer manual. A fully
charged battery should be used when the camera is connected to the printer. The use of
the AC adapter (sold separately) is recommended over the use of the battery.
Using USB DIRECT-PRINT
Connect the camera to the printer using the camera’s USB cable. The
larger plug on the cable is connected to the printer. Lift the rubber
cover and insert the smaller plug of the cable into the camera. Turn
the camera on with the mode dial; the dial can be set to any position.
The USB Direct Print screen will be displayed.
Use the left/right keys of the controller to
display the image to be printed.
Printing finished.
Changing the memory card - Data-transfer mode
Windows 98 and 98 Second Edition
1. Turn off the camera.
2. Change the memory card.
3. Turn on the camera to remake the USB connection.
Windows ME, 2000 Professional, and XP
Macintosh
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 116).
2. Turn off the camera.
3. Change the memory card.
4. Turn on the camera to remake the USB connection.
1. Stop the USB connection by dragging the drive icon into the trash (p. 117).
2. Turn off the camera.
3. Change the memory card.
4. Turn on the camera to remake the USB connection.
Never remove the card when the access lamp is red - the data or
memory card may permanently be damaged.
The number of prints in the print run are displayed on the
LCD monitor. Use the left/right keys to highlight “Yes,” and
press the center of the controller to start printing.
Print file?
Number of prints: 7
Yes No
Number of prints in the print run.
Number of copies of the displayed image.
Strike through indicates unprintable file type.
Repeat the previous steps until all the
images to be printed are selected. Press
the central button of the controller to
begin the printing routine.
Press the up key to select the number of
copies to be printed. A maximum of nine
copies can be selected. To deselect an
image for printing, press the down key
until the number of copies reaches zero.
Once printing begins, the operation can be canceled by
pressing the center of the controller. The printing finished
message will indicate the end of the operation; turn the
camera off to end the routine.
The display button switches between
the single frame and index playback
formats.
:move :sel. :print
OK
Loading ...
Loading ...
Loading ...