Loading ...
Loading ...
Loading ...
©2012-2015 DJI. All Rights Reserved. - 7 -
Connection
Antenna
Head
Ground End
· You should have a DJI Ground Station installed laptop.
· Use the USB Cable supplied by us to connect the wireless data-
link ground end to you laptop. One end of the USB cable has two
heads, make sure the communication interface is plugged into
your laptop. If the power supply is insufficient using one USB port,
then plug the power interface Into the laptop also.
Air End
· 900MHz wireless data-link air end has two CAN ports. When you use it with ACE flight control
system and low voltage servo, you should connect one CAN port to spare CAN port on
autopilot system, and connect another one to a battery whose output voltage is in the range
of wireless data-link air end working voltage.
· 2.4GHz wireless data-link air end has only one CAN port.
· Usually connecting one CAN port on air end to any spare CAN port on DJI flight control
system is enough. Note that A2 uses should use CAN2 port.
· WKM user should use it with PMU.
· High voltage servos & FBL systems can drain the flight battery fast. Please make sure your
flight pack is sufficient for the flight time intended.
· Make sure the antenna head of Wireless data-link air end is erect down, then you can have
the largest range.
Any spare CAN
port on DJI flight
control system
Battery
ACE flight control system, low voltage
servo and 900M data-link connection
Normal connection with
flight control system
Any spare CAN
port on DJI flight
control system
Any spare CAN
port on DJI flight
control system
Communication Interface
Power Interface
Ground Station
Loading ...
Loading ...
Loading ...