Loading ...
Loading ...
Loading ...
Operation Guide
116
Walking Speed Mode
(Continued)
!e To move the motorcycle backward,
press and hold the shift down switch (-),
and then release the brakes.
To move the motorcycle forward, press
and hold the shift up switch (+), and
then release the brakes.
u The motorcycle will move forward/
backward as long as you hold the
switch down.
u When the shift up switch (+)
(forward) is pressed, “F” is displayed
on the gear position indicator.
When the shift down switch (-)
(backward) is pressed, “R” is
displayed on the gear position
indicator.
u It may take a few seconds before the
motorcycle starts to move.
u When operating the motorcycle in
Walking Speed mode, be sure to sit
on the motorcycle in your normal
riding position.
u When the engine is stopped in
Walking Speed mode, the clutch will
disengage. This will cause the
motorcycle to abruptly lose traction.
u While in Walking Speed mode, do
not press the engine stop switch
except in an emergency. This will
cause the motorcycle to abruptly lose
traction.
Guide the motorcycle cautiously, using
your legs to maintain balance.
Use extreme care to maintain balance
while in Walking Speed mode on loose
surfaces (sand, dirt, gravel) or grease-
covered pavement.
!
f
To stop the motorcycle, apply the brake
lever or pedal.
!
g
To end Walking Speed mode, apply the
brake lever or pedal. After the
motorcycle has stopped, press the
Walking Speed mode switch while
operating the brake lever or pedal, or
press the N switch. Make sure the
Walking Speed mode indicator turns off
and the indicator comes on.
Shift up switch (+)
Shift down switch (-)
N
Loading ...
Loading ...
Loading ...