Loading ...
Loading ...
Loading ...
AFTER USE
1. Turn the juicer o by turning the control knob to the
OFF position. Unplug the juicer.
2. Remove the pulp collector the same way you placed it
in position.
HINT: you’ll have to tilt it away from the juicer. (Figure 8)
3. Remove the safety locking arm from the juicer cover
and lower it downward out of position so it rests on the
side of the unit. (Figure 9)
4. Remove the lter basket, while the cutting disc is still
in place.
5. To remove the cutting disc, use your ngers to wedge
underneath the side grooves and lift up. (Figure 10)
WARNING
The cutting disc has sharp blades.
Avoid touching the blades to avoid injury.
CARE AND CLEANING
• All parts are removable and dishwasher safe, with the exception of the motor base.
• After disassembling all removable parts of the juice extractor, wash them by hand
with warm soapy water or in the dishwasher (top shelf only). If the pulp dries out in
the pulp collector container, the lter or the lter basket, let it soak in water for
approximately 10 minutes before washing it.
• Wipe the motor base with a damp cloth.
• Cleaning the Rinse ‘n Ready lter: As soon as you nish juicing, rinse the lter with
running water to avoid the pulp drying and clinging to the lter. If needed, you might
use a soft sponge to remove any remaining residue.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.
MAINTENANCE
• Some plastic parts might stain when in contact with some fruits and vegetables for too long.
In order to avoid this from happening, all parts should be washed immediately after each use.
Figure 8
Figure 9
Figure 10
www.oster.com 8
Loading ...
Loading ...
Loading ...