Loading ...
Loading ...
Loading ...
24 English
Settings
Ğ
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and
then follow these steps:
1. Select Network Status. The product
searches for a network, and then displays the
connection failed message.
2. On the bottom of the screen, select IP
Settings, and then press the OK button.
The IP Settings screen appears.
3. Select the IP Settings field, and then press
the OK button.
4. Select Enter manually in the IP Settings
field, and then press the OK button.
5. Select a parameter to enter (IP Address, for
example), and then press the OK button.
Use the buttons on the remote control
to enter the numbers for the parameter.
Use the buttons on the remote control
to move from entry field to entry field within a
parameter. When done with one parameter,
press the OK button.
6. Press the or button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 5.
7. Repeat Steps 5 and 6 until you have filled in
all parameters.
| NOTE |
\
You can get the Network parameters from your
Internet provider.
8. When finished entering all the parameters,
select OK, and then press the OK button. The
product verifies the network connection and
then connects to the network.
Wireless Network
You can set up a wireless network connection in
four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS PIN
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
Ğ
Wireless - Automatic
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Network, and then press the OK
button.
3. Select Network Settings, and then press the
OK button.
4. Select Wireless in the Network Settings
screen, and then press the OK button. The
product searches for and then displays a list
of the available networks.
Network Settings
Select your network type.
Wireless network
iptime23
iptime
solugen_edu#2
Network type Wireless
Refresh WPS(PBC)
You can connect your Ultra
HD Blu-ray player to the
internet. Please select which
wireless network to use.
5. Select the desired network, and then press
the OK button.
6. On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter letters by selecting a letter with an arrow
button, and then pressing OK button.
Loading ...
Loading ...
Loading ...