Loading ...
Loading ...
Loading ...
20
Operation
Remote Control and Keyless Entry
Pre-programmed remote control included,no need to program
the remote.
To add or reprogram a remote control, follow the instructions below. Older
Chamberlain remote controls are NOT compatible.
Program Usingthe Multi-Function orMotion DetectingControl
Panel
1. Press the LEARN button on the door control to enter Programming
Mode.
2. Press the LEARN button again, the LED will flash once.
3. Remote Control: Press the button on the remote control that you
wish to operate your garage door.
Keyless Entry: Enter a 4-digit personal identification number
(PIN) of your choice on the keyless entry keypad. Then press the
ENTER button.
The garage door opener lights will flash (or two clicks will be heard) when
the code has been programmed. Repeat the steps for programming additional
remote controls or keyless entry devices. If programming is unsuccessful,
repeat the steps using the learn button on the garage door opener.
3
1 2
The command LED
will flash once
The command LED will
flash once again.
OR
PIN
? ? ? ?
Program Usingthe Smart ControlPanel
®
1. Press the navigation button below "MENU" to view the Features
menu.
2. Use the navigation buttons to scroll to "PROGRAM".
3. Select "REMOTE" or "KEYPAD" to program from the program
menu.
4. Remote Control: Press the button on the remote control that you
wish to operate your garage door.
Keyless Entry: Enter a 4-digit personal identification number
(PIN) of your choice on the keyless entry keypad. Then press the
ENTER button.
The garage door opener lights will flash (or two clicks will be heard) when
the code has been programmed. Repeat the steps for programming additional
remote controls or keyless entry devices. If programming is unsuccessful,
repeat the steps using the learn button on the garage door opener.
4
3
21
OR
PIN
? ? ? ?
Press to continue
Press
to continue
MYQ WI-FI OPENER
REMOTE
MYQ ACCESSORY
KEYPAD
Program Usingthe Garage DoorOpener LearnButton
1. Locate the Learn Button.
2. Press and immediately release the Learn button. The Learn LED
will glow steady for 30 seconds. Within 30 seconds...
3. Remote Control: Press and hold the button on the remote control
that you wish to use.
Keyless Entry: Enter a 4-digit personal identification number
(PIN) of your choice on the keyless entry keypad. Then press and
hold the ENTER button.
Release the button when the garage door opener lights blink or two clicks are
heard. When replacing the light lens cover, ensure the antenna wires are
hanging straight down.
LEARN LED
LEARN
Button
“click”
“click”
PIN
1-2
3
HomeLink
®
If your vehicle is equipped with HomeLink, a Compatibility Bridge
TM
(not
included) may be necessary for certain vehicles. Visit
bridge.chamberlain.com to find out if a Bridge is needed.
Loading ...
Loading ...
Loading ...