Loading ...
Loading ...
Loading ...
17
Operation
Smart Control Panel
®
Push Bar
LIGHT Button
Motion Sensor
Screen
Navigation Buttons
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control
to the garage door opener, press the push bar until the garage door opener
activates (it may take up to 3 presses). Test the door control by pressing the
push bar; each press of the push bar will activate the garage door opener.
SCREEN: The screen displays the time, temperature, and current battery
charge (if applicable) until the menu button is pressed, and then it will display
the menu options. If there is a problem with the garage doors opener the
screen will display an error code, see page 23.
PUSH BAR: Press the push bar to open or close the door.
LOCK: Prevents remote controls from working, while still allowing
activation from the door control and keyless entry. (Factory setting is OFF.)
To turn the LOCK feature ON or OFF:
1. Select LOCK from the menu. When the LOCK feature is on, a
message displays on the screen.
LIGHT BUTTON: Turns the garage door opener lights on or off when
pressed. Lights stay on for 4-1/2 minutes (factory setting), and can be
changed by accessing the menu with the navigation buttons. The LIGHT
button will not control the lights when the door is in motion.
LIGHT SETTINGS:
To change the amount of time the lights stay on:
1. Select LIGHT SETTINGS from the menu.
2. Select LIGHT TIME.
3. Select the time interval.
To turn the entry light feature ON or Off (Factory default is On):
1. Select LIGHT SETTINGS from the menu.
2. Select AUTOMATIC LIGHTS.
3. Select ENTRY SENSOR.
MOTION SENSOR: Turns the garage door opener lights on when motion is
detected. Lights stay on for 4-1/2 minutes (factory setting), then turn off.
To turn the motion sensor ON or OFF:
1. Select LIGHT SETTINGS from the menu.
2. Select AUTOMATIC LIGHTS.
3. Select MOTION SENSOR.
TIMER-TO-CLOSE (TTC): DO NOT enable TTC if operating a one-piece
door. TTC is to be used ONLY with sectional doors. The TTC can be set to
close your garage door after a specified period of time (1, 5, or 10 minute
intervals). As the time to close the garage door opener occurs, the opener
beeps and the lights flash before closing the door. If an object blocks the door
while closing, the garage door opener will try to close the door again. If the
object is not removed after the second try, the garage door opener reverses
open, stop and WILL NOT close until the object is removed from the door’s
path. TTC WILL NOT work if the garage door opener is operating by battery
power or if the safety reversing sensors are misaligned. Adding a keyless
entry to control the opener is recommended to avoid an accidental lock out
when using this feature.
To turn TTC on or off or to set the TTC time interval:
1. Select TTC from the menu.
2. Select a time interval of 1, 5, 10 minutes or a custom setting up to
99 minutes. Once the TTC has been set and the door is open, a
message will display on the screen with the selected time interval.
To temporarily suspend the TTC feature select HOLD. Select REL to resume
normal TTC operation.
Other MenuOptions
CLOCK SETUP: Set the time; choose 12 or 24 hour clock and show/hide
clock.
TEMPERATURE: Display the temperature in Fahrenheit or Celsius and
show/hide the temperature.
LANGUAGE: Select English, Spanish or French.
CONTRAST ADJUST: Adjust the screen contrast.
PROGRAM: Any compatible remote control, wireless keyless entry, or
myQ
®
devices can be programmed to the garage door using the PROGRAM
option from the menu.
Loading ...
Loading ...
Loading ...