Loading ...
Loading ...
Loading ...
19
Operation
Multi-Function Control Panel
Command LED
LIGHT Button
LEARN Button
LOCK Button
Push Bar
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control
to the garage door opener, press the push bar until the garage door opener
activates (it may take up to 3 presses). Test the door control by pressing the
push bar; each press of the push bar will activate the garage door opener.
PUSH BAR: Press the push bar to open or close the door.
LEARN BUTTON: Use to program compatible remote controls, wireless
keyless entries and myQ
®
devices to the garage door opener.
LOCK: Prevents remote controls from working, while still allowing
activation from the door control and keyless entry. (Factory setting is OFF.)
Turn ON:
Press and hold the LOCK button for 2 seconds. The command LED will flash
as long as the lock feature is on.
Turn OFF:
Press and hold the LOCK button for 2 seconds. The command LED will stop
flashing and normal operation will resume.
LIGHT BUTTON: Turns the garage door opener lights on or off when
pressed. Lights stay on for 4-1/2 minutes (factory setting). The LIGHT button
will not control the lights when the door is in motion.
To change the amount of time the lights stay on:
Press and hold the LOCK button (approximately 10 seconds) until the garage
door opener lights flash. The time interval is indicated by the number of times
the garage door opener lights flash:
l 1 flash is 1-1/2 minutes
l 2 flashes is 2-1/2 minutes
l 3 flashes is 3-1/2 minutes
l 4 flashes is 4-1/2 minutes
To cycle through the time intervals repeat the step above. If the push bar LED
is continuously blinking, the LOCK feature needs to be turned off.
To turn the Light feature on or off (Factory default is On):
Turn OFF:
1. Close the garage door.
2. Start with the garage door opener lights "OFF".
3. Press and hold the LIGHT button (approximately 10 seconds) until
the garage door opener lights turn off, then on again.
Turn ON:
1. Close the garage door.
2. Start with the garage door opener lights "ON".
3. Press and hold the LIGHT button (approximately 10 seconds) until
the garage door opener lights turn off, then on again.
Loading ...
Loading ...
Loading ...