Loading ...
Loading ...
Loading ...
11
Electrical and Wiring
Forinstallation with pre-wiring,see Electrical and Wiringstep 8 in the Installation
Manual.
Electrical and Wiring 8 - Wire the Safety Reversing Sensors
Without Pre-Wiring
1. Run the wire from both sensors to the garage door opener. Attach the wire to the wall and ceiling with
staples.
2. Strip 7/16" (11 mm) of insulation from each set of wires. Separate the wires. Twist the white wires
together. Twist the white/black wires together.
3. Insert the white wires into the white terminal on the garage door opener. Insert the white/black wires into
the grey terminal on the garage door opener. To insert or remove the wires fromthe terminal, push in the
tab with a screwdriver tip.
To continue, go to Electrical and Wiring 10 in the
InstallationManual
Staple
WHITE
WHITE
GREY
RED
1
2
3
HARDWARE
Insulated Staple (Not Shown)
7/16" (11 mm)
Loading ...
Loading ...
Loading ...