Loading ...
Loading ...
Loading ...
Before using for the first time en
13
7 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you need to configure the settings before you can use
it. It may take a few seconds for the settings to appear
in the display.
1.
Press the text field for the required setting.
Possible settings:
– Language
– Clock
2.
Turn the control ring to change the setting as re-
quired.
3.
Finally, press "Complete the settings" to confirm.
a A note appears in the display confirming that the ini-
tial configuration is complete.
a The time that is set appears on the display.
4.
To check the appliance before heating for the first
time, open and close the appliance door once.
7.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Remove the product information and the accessor-
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
the adhesive tape that is in or on the appliance.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press to switch the appliance on.
4.
Apply the following settings:
Type of heating 4D hot air
Temperature Maximum
Cooking time 1hour
→"Basic operation", Page13
5.
Press to start.
‒ Keep the kitchen ventilated while the appliance is
heating.
a Once the time has elapsed, an audible signal
sounds and the display shows the time as zero.
6.
Press to switch the appliance off.
7.
Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with
soapy water and a dish cloth.
8.
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
8 Basic operation
8.1 Switching on the appliance
▶
Press to switch the appliance on.
a The Bosch logo appears in the display. The types of
heating then appear.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
▶
Press to switch the appliance off.
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
▶
Press to start.
a The settings, the running time, the display ring and
the heating line appear in the display.
8.4 Pausing or cancelling operation
You can briefly pause operation and then continue. If
you cancel operation completely, the settings will be re-
set.
1.
To pause operation briefly:
‒ Briefly press .
‒ To continue operation, press .
2.
To cancel operation completely, press and hold
for approx. 3 seconds.
a Operation will stop and all the settings will be reset.
8.5 Setting the operating mode
Once you have switched on the appliance, it suggests
an operating mode, e.g. types of heating.
1.
If you want to use a different operating mode to the
one suggested, press .
a The list of operating modes is displayed.
→"Operating modes", Page10
Loading ...
Loading ...
Loading ...