Loading ...
Loading ...
Loading ...
Turning the Ice Maker On/Off:
The On/Off switch, located on the left wall of the freezer door, can only
be accessed when the ice storage bin has been removed. See the following
section for bin removal instructions.
1
I
• To turn on the ice maker, flip the switch to the ON (up) position.
• To manually turn off the ice maker, flip the switch to the OFF (down)
position.
NOTE: The ice maker has an automatic shutoff to keep the storage bin
from overfilling during normal operation. As ice is made, the ice cubes will
fill the ice storage bin, and the ice cubes will raise the shutoff arm to the
OFF (arm up) position. When the storage bin is at full capacity, the ice
maker will automatically stop ice production, but the ice maker On/Off
switch will remain in the ON (up) position.
Ice production OFF
(Shutoff arm UP)
Ice production ON
(Shutoff orm [70 WN)
Removing and Replacing the Ice Storage Bin:
1. Press down the release lever and tilt the bucket outward. Use both
hands to hold the base of the storage bin, then lift it up and out.
A
A. Release lever
NOTE: It is not necessary to flip the ice maker On/Off switch to the
OFF (dawn) position when removing the storage bin. The storage bin
2.
sensor, located on the left wall of the freezer door, stops the ice maker
from producing ice if the door is open or the storage bin is removed.
A. On/Off switch
B. Storage bin sensor
Replace the bin by sliding it onto the door, then tilting it back into an
upright position. The release lever will click when the bin is securely in
place.
REFRIGERATORFEATURES
Your model may have some or all of these features. Features that can be
purchased separately as product accessories are labeled with the word
"Accessory." Not all accessories will fit all models. If you are interested in
purchasing one of the accessories, please call the toll-free number on the
back cover or in the "Accessories" section.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
To Remove and Replace the Bins:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports and pushing
it down until it stops.
18
Loading ...
Loading ...
Loading ...