Binder BF 720 User Manual

Loading ...

BD / BF / ED / FD / FED (E3.1) 03/2019 page 57/106

12. Options

12.1 APT-COM™ 4 Multi Management Software (option)

The chamber is regularly (FED) or optionally equipped with an Ethernet interface on the chamber rear

that can connect the BINDER APT-COM™ 4 Multi Management Software. The actual temperature value

is given at adjustable intervals. Programming can be performed graphically via PC. Up to 100 chambers

can be cross-linked. The MAC Address is indicated in the Ethernet menu (chap. 11). For further infor-

mation, please refer to the APT-COM™ 4 operating manual.

To establish a connection via the chamber’s Ethernet interface, the chamber must be turned off.

12.2 Data logger kits (option)

BINDER Data Logger Kits offer an independent long-term measuring system for temperature. They are

equipped with a keyboard and a large LCD display, alarm functions and a real-time function. Measure-

ment data are recorded in the Data Logger and can be read out after the measurement via the RS232

interface of the Data Logger. It offers a programmable measuring interval and permits storing up to 64000

measuring values. Reading out is done with the Data Logger evaluation software. You can give out a

combined alarm and status protocol directly to a serial printer.

For BD/BF: Data Logger Kit T 220: Temperature range -90 °C / -130 °F up to +220 °C / 428 °F

For ED/FD/FED: Data Logger Kit T 350: Temperature range 0 °C / 32 °F up to +350 °C / 662 °F

For detailed information on installation and operation of the BINDER Data Logger, please

refer to the mounting instructions Art. No. 7001-0204 and to the original user manual of the

manufacturer, supplied with the data logger.

12.3 Object temperature display with additional Pt100 temperature sensor (op-

tion)

With this option an additional flexible temperature sensor Pt100 measures the chamber temperature or

the temperature of the charging material which is shown on the controller. The sensor-top protective tube

of the flexible Pt100 can be immersed into liquid substances.

The object temperature display enables the determination of the actual temperature of the charging mate-

rial during the whole process. The object temperature is displayed in the controller in Normal Display.

Chamber with option object temperature display:

Actual temperature value and actual object temperature value

Technical data of thePt100 sensor:

• Three-wire technique

• Class B (DIN EN 60751)

• Temperature range up to 320 °C / 608 °F

• Stainless steel protective tube 45 mm length, material no. 1.4501

Loading ...

Binder BF 720 Standard Incubator