1. Home
  2. Binder
  3. Binder BF 720 User Manual
  4. Page 16

Binder BF 720 Standard Incubator

User Manual - Page 16

For BF 720. Also, The document are for others Binder models: BD 56, BD 115, BD 260, BD 720, BF 56, BF 115, BF 260, ED 56, ED 115, ED 260, ED 720, FD 56, FD 115, FD 260, FD 720, FED 56, FED 115, FED 260, FED 720

PDF File Manual, 107 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
BD / BF / ED / FD / FED (E3.1) 03/2019 page 16/106
• Permissible ambient temperature range during operation: +18 °C up to +40 °C / 64.4 °F to 104 °F. At
elevated ambient temperature values, fluctuations in temperature can occur.
The ambient temperature should not be substantially higher than the indicated ambient
temperature of +25 °C / 77 °F to which the specified technical data relate. For other ambi-
ent conditions, deviations from the indicated data are possible.
• Permissible ambient humidity: 70 % r.H. max., non-condensing.
• Installation height: max. 2000 m / 6562 ft. above sea level.
When placing several chambers of the same size side by side, maintain a minimum distance of 250 mm /
9.84 in between each chamber. Wall distances: rear 160 mm / 6.30 in, sides 100 mm / 3.94 in. Spacing
above the chamber of at least 100 mm / 3.94 in must also be accounted for.
Two devices up to size 115 can be stacked on top of each other. For this purpose place rubber pads un-
der all four feet of the upper chamber to prevent the device from slipping.
CAUTION
Sliding or tilting of the upper chamber.
Damage to the chambers.
When stacking, place rubber pads under all four feet of the upper chamber.
Stack only chambers of the same size.
Chambers sizes 260 and 720 must NOT be stacked.
CAUTION
Danger by stacking.
Damage to the chambers.
∅ Do NOT place chambers sizes 260 or 720 on top of each other.
To completely separate the chamber from the power supply, you must disconnect the power plug. Install
the chamber in a way that the power plug is easily accessible and can be easily pulled in case of danger.
Do not conduct the power cable above the exhaust duct.
For the user there is no risk of temporary overvoltages in the sense of EN 61010-1:2010.
Do not install or operate the chamber in potentially explosive areas.
DANGER
Explosion hazard.
Danger of death.
∅ Do NOT operate the chamber in potentially explosive areas.
KEEP explosive dust or air-solvent mixtures AWAY from the vicinity of the chamber.
Loading ...
Loading ...
Loading ...