Loading ...
Loading ...
Loading ...
89
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 85. Items not listed in
the chart should be lubricated at the General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item Lube Capacity at
Fluid Change
Method
Engine Oil PS-4 5W-50 4-Cycle
Oil
1.9 L See page 90.
Brake Fluid DOT 4 Brake Fluid --- See page 102.
Transmission Oil AGL Gearcase
Lubricant &
Transmission Fluid
1000 ml See page 94.
Demand Drive
Fluid (Front
Gearcase)
Demand Drive Fluid 275-300 ml See page 96.
Rear Gearcase Oil ATV Angle Drive
Fluid (or GL5 80-90
weight gear lube)
150 ml See page 98.
Front Prop Shaft
Yoke
U-Joint Grease --- Grease fittings (3 pumps
maximum) every 800 km,
before long periods of
storage, or after pressure
washing or submerging.
Front Prop Shaft Yoke
Loading ...
Loading ...
Loading ...