Loading ...
Loading ...
Loading ...
116
MAINTENANCE
Lights
Low Beam Adjustment
The low beam can be adjusted slightly
upward or downward.
1. Loosen the Phillips screw located at
the rear of the headlamp.
2. Tilt the headlamp upward or
downward.
3. Tighten the screw.
Lower Headlamp Replacement
1. Turn the back of the headlight
harness counter-clockwise and pull
the harness assembly away from the
headlight assembly.
2. Remove the headlamp and install
the new headlamp.
3. Reinstall the harness assembly into
the headlight assembly.
4. Turn the headlight harness
clockwise to secure the headlamp.
Headlight Housing Replacement
1. Remove the seven (7)
headlight pod screws.
2. Pull the pod cover forward.
3. Unplug the headlamp from
the wiring harness.
4. Use a small screwdriver to
remove the o-rings from the
headlight mounting tabs.
5. Pull the headlight housing
up from the bracket for
removal.
6. Reverse the steps to install the new housing and reassemble the pod.
Phillips
Screw
Harness
Lamp
Headlight
Housing
Loading ...
Loading ...
Loading ...