Loading ...
Loading ...
Loading ...
115
MAINTENANCE
Lights
High Beam Adjustment
The headlight beam can be adjusted slightly.
1. Position the vehicle on a level surface. The headlight should be
approximately 7.6 m from a wall.
2. Place the transmission in PARK.
3. Measure the distance from the floor to the center of the headlight
and make a mark on the wall at the same height. Include rider
weight on the seat when measuring.
High Beam Adjustment
1. Start the engine.Turn the headlight switch to high beam.
2. Observe the headlight aim on the wall. The most intense part of the
headlight beam should be 5 cm below the mark on the wall.
3. The adjustment screw is
located on the right side of the
headlight pod. To adjust the
beam, loosen the screw.
Adjust the headlamp to the
desired position, then tighten
the screw.
7.6 m
5 cm
X
X
Models with pod headlight
Adjustment
Screw
Loading ...
Loading ...
Loading ...