Loading ...
Loading ...
Loading ...
29
FEATURES AND CONTROLS
Hitches
Hitch Installation/Removal
For front hitch installation, install the applicable hitch bracket before
installing the hitch.
1. Release the wire lock from the 12.7 mm pin and remove the pin.
2. Install the hitch to the receiver.
3. Install the 12.7 mm pin through the bore of both the receiver and the
hitch. Secure the wire lock. Make sure the hitch assembly is secure
at that the wire lock is properly engaged over the pin.
4. To remove the hitch, release the wire lock, remove the hitch,
reinstall the pin to the receiver and secure the wire lock.
7-Way Trailer Connector
The 7-way trailer connector
installed on your vehicle meets the
requirements of European standard
ISO 1724.
This connector uses all 7 pins on
newer model trailers. An older
model trailer may not be
compatible with this connector.
Improper electrical wiring changes
can result in damage to both
vehicle and trailer components. When in doubt about your trailer
connection, please contact a qualified towbar specialist for assistance.
Step 2Step 1 Step 3
7-Way Trailer Connector
Loading ...
Loading ...
Loading ...