Loading ...
Loading ...
Loading ...
32
FEATURES AND CONTROLS
All Wheel Drive (6X6) System
AWD Mode
Move the momentary switch to the right to engage AWD (6X6). AWD
will engage when engine speed slows to below 3100 RPM. The gauge
will display “AWD”.
There is no limit to the length of time the vehicle may remain in AWD.
The vehicle automatically engages AWD when operating in reverse if
the switch is set to the AWD position.
Once enabled, AWD remains enabled until the switch is turned off. If
the switch is turned off while the demand drive unit is moving, it will
not disengage until the rear wheels regain traction.
When in AWD, the demand drive unit will automatically engage any
time the rear wheels lose traction. When the rear wheels regain traction,
the demand drive unit will automatically disengage.
ADC AWD Mode
Move the momentary switch to the right, past the
AWD setting, to engage ADC AWD. When the switch
is on ADC AWD, the ADC system allows engine
braking to all six wheels when the vehicle descends a
hill or incline. Always move the AWD switch to ADC
AWD before ascending or descending a hill. See page
33.
4X6 Mode
Move the momentary switch to the far left to operate
in rear four-wheel drive (4X6). When the switch is on
4X6, the middle and rear wheels drive at all times.
AWD will disengage when engine speed slows to
below 3100 RPM.
NOTE: The gauge will display “2X4” when operating in
rear four-wheel drive (4X6).
Loading ...
Loading ...
Loading ...