Loading ...
Loading ...
Loading ...
38
English
Device setting
Setting sleep timer
You can preset a certain period of time after
which the set will auotmatically switch to
standby mode.
● On the remote control,
a. Press and hold SLEEP TIMER until Sleep
Timer - Off appears
b. Press SLEEP TIMER briefly and
repeatedly until the desired time period
appears on the display
or
1 Press HOME to enter the main menu, and
then select the Setting menu by pressing the
navigation controls
3 or 4 and 2
2 Use the navigation controls 3 or 4 and 2 to
select Device followed by Sleep Timer
➜ The display shows the following options:
Sleep 15, 30, 45, 60, 90, Off
➜ Display shows the selected option briefly
and returns to its previous status. The icon
Z
Z
appears
3 To view the countdown time to standby mode,
press SLEEP again
To deactivate the sleep timer, press SLEEP
TIMER repeatedly until Off is displayed
or
Press STANDBY-ON/ ECO POWER
y to
switch the set to standby mode
Reset
If desired, you can restore your WAK3300 to its
default settings (including the network setting).
Reset WAK3300:
– To change WAK3300’s connected music
source (e.g. from Philips Music Center to
UPnP Music Server or vice versa)
– To re-establish the Wi-Fi connection between
WAK3300 and Philips Wireless Music Center.
1 Use a sharp-pointed tool to press the RESET
hole on the set
➜ The display shows Restore factory setting
2 Use the navigation controls 3 or 4 and 2 to
select Yes
➜ The set will reboot.
3 Follow the steps under the Installation
chapter
➜ You will re-establish the Wi-Fi connection
between WAK3300 and Philips Wireless
Music Center or a UPnP-enabled music
server
Helpful hints:
You can also perform resetting by:
a. Entering the Setting menu from the main
menu
b. Using the navigation controls
3 or 4 and 2
to select Device followed by Restore
Loading ...
Loading ...