Loading ...
Loading ...
Loading ...
n If the tray is dirty, clean it under running water. If the metal contacts are dirty, clean by scrubbing them
under water. Wipe the metal contacts dry before putting them back in the machine.
n The drip trays will be separated when you empty them. Avoid spilling water as much as possible on the
metal contacts located at the end of the drip tray.
n If the machine asks you to empty the drip tray when it is empty, check whether the metal contacts at the
back of the drip tray are clean and thoroughly dry.
n Filling the coffee bean container – see visuals p. 12
The coffee bean container (22) is fitted with a sensor to detect the presence of beans.
n To fill the container, open the lid by slightly lifting it on the sides. Then it opens by itself.
n Put coffee beans into the container, which has a capacity of about 250 g.
n Close the lid.
KRUPS SERIE EA9000
40
n The machine prompts you to fill the bean container although there are beans in it: Some types of coffee
can interfere with optical sensors; you must shake the beans with your hand to make the function operational
once again.
n The machine detects beans, but the coffee dispensed is very/too light: Some beans (especially those
that are too large or too greasy) do not easily go into the grinder. Use your hand to ease them into the grinder
and/or change the type of coffee beans.
n The machine does not detect the absence of coffee beans: Check that a bean is not obstructing the optical
sensors. Otherwise, the function is not operational.
Caution: Never put ground coffee or water into the coffee bean container.
Ensure that no foreign bodies (e.g. small stones, hard wood) can get into the coffee bean
container as they could damage the grinder (not covered by the guarantee).
!
Danger: Any contact of the conductive parts of the appliance with humidity or water may lead to fatal injuries
due to the presence of electricity!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page40
Loading ...
Loading ...
Loading ...