Loading ...
Loading ...
Loading ...
19
TROUBLESHOOTING
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
contact Customer Service at [email protected]
PROBLEM POSSIBLE CAUSE SUGGESTED ACTION
-----------
The safety key falls off.
Put the safety key back.
Change the safety key switch or
sensor. If it still doesn’t work
, change
the computer.
E1
Inverter communication
error.
Change communication wire.
Change inverter\transformer.
E2 Stall speed production.
Check if motor wire was inserted well.
Change inverter.
Check if voltage is AC 220±5%.
E3 Speed inductor failed.
Check if the wire of speed were
inserted properly.
Change measured course line.
Change inverter.
E4
Incline learning failed.
Check if the wire of incline motor
is inserted properly.
Change inverter.
Change incline motor.
E5 Over current production.
Check if the resistance is too big.
Change motor.
Change inverter.
E6 Incline inductor failed.
Check if the wire of incline were
inserted properly.
Change incline motor.
No display No electricity or damage.
Check if the circuit breaker is tripping
off. If yes, just press it.
Check if the power switch, circuit
breaker, power code, and the inverter
were inserted well.
Check if extension sensor wire was
inserted well.
Change inverter.
Version 2.3
Loading ...