Loading ...
Loading ...
Loading ...
9
MAINTENANCE & CARE
General cleaning will help prolong the life and performance of your treadmill. Keep the treadmill clean
and maintained by dusting the components on a regular basis. Clean the two exposed sides of the
Running Belt (No. 9) will prevent dust from accumulating underneath. Keep your running shoes clean
so that dirt from the shoes does not wear the Running Board (No. 10) and Running Belt (No. 9).
Clean the surface of the Running Belt (No. 9) using a clean damp cloth. Keep liquids away from
electrical parts and Running Belt (No. 9).
To better maintain the treadmill and prolong its life it is suggested that the machine be powered off for
10 minutes every 2 hours and fully powered off whenever not in use.
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 2.1 MPH to check if the Running Belt (No. 9) drifts.
If the Running Belt (No. 9) moves to the
right, turn the adjusting bolt on the right side
¼ turn clockwise, the
n turn the left
adjustment bolt ¼ turn counter-clockwise. If
the Running Belt (No. 9) does not move,
repeat this step until it centers. Refer to
Figure A.
If the Running Belt (No. 9) moves to the
left, turn the adjusting bolt on the left side ¼
turn clockwise, then turn the right adjustment
bolt ¼ turn counter-clockwise
. If the
Running Belt (No. 9) does not move, repeat
this step until it centers. Refer to Figure B.
Over time the Running Belt (No. 9) will
loosen. To tighten the Running Belt (No. 9),
turn the Left & Right side adjustment bolts
one full turn clockwise, check the tension of
the Running Belt (No. 9).
Continue this
process until Running Belt (No. 9) is at the
correct tension. Make sure to adjust both
si
des equally to ensure correct belt
alignment. Refer to Figure C.
Loading ...
Loading ...
Loading ...