Loading ...
Loading ...
Loading ...
Conventional Cruise Control
112
(2) Switch to Conventional Cruise Control.
Press and hold the / (Following distance setting) switch for approximately 2
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise
Control. A notification sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and (Conventional Cruise Control indicator)
(white) is displayed.
To set the ready status:
Conventional Cruise Control can be acti-
vated when all of the following conditions
are met and (READY indicator) is
displayed on the EyeSight display area.
- All doors (except the rear gate/trunk)
are closed.
- The driver’s seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the “D” or “M”
position.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The X-MODE is not turned on (the X-MODE indicator goes off). (if equipped)
- The vehicle speed is between approximately 20 mph (30 km/h) and 90 mph (145
km/h).
S03397
S03431
Conven-
tional
Cruise
Control
indicator
(white)
S03432
READY
indicator
B2612BE-A.book 112 ページ ２０２１年２月１５日 月曜日 午前１２時２４分
Loading ...
Loading ...
Loading ...