Loading ...
Loading ...
Loading ...
Conventional Cruise Control
111
■ Setting Conventional Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the (CRUISE) switch. At this time, (Adaptive Cruise Control indicator)
(white) and the following distance setting indicator are displayed on the EyeSight
display area of the combination meter display. The set vehicle speed display will read
“- - MPH (- - - km/h)”.
When the (CRUISE) switch is pressed, the initial cruise control mode is always
Adaptive Cruise Control.
NOTE
• When the (CRUISE) switch is first turned on, the Adaptive Cruise Con-
trol is activated.
• To change the Cruise Control mode, press and hold the / (Follow-
ing distance setting) switch for approximately 2 seconds or longer.
(This is effective only when the main Cruise Control is on and neither Adap-
tive Cruise Control nor Conventional Cruise Control are activated.)
• Conventional Cruise Control can be used even when EyeSight is temporarily
turned off.
How to use Conventional Cruise Control
S03393
S03414
Adaptive
Cruise
Control
indicator
(white)
Following
distance
setting
indicator
B2612BE-A.book 111 ページ ２０２１年２月１５日 月曜日 午前１２時２４分
Loading ...
Loading ...
Loading ...