Loading ...
Loading ...
Loading ...
Operation
Delete journey data presets
●
When in T
ravel data select desired memo-
ry.
●
Hold the button of the multifunction
steering wheel or the button of the multi-
function wheel pressed down for about 2
seconds.
Select the instructions
In the Infotainment system, in the menu Vehi-
cle settings, you can display different travel
data
›››
page 93.
Current consumption: The current
fuel consumption display operates
throughout the journey, in litres/100 km;
and with the engine running and the ve-
hicle stopped, in litres/hour.
Average consumption: The average
fuel consumption is displayed after driv-
ing for approximately 300 metres.
Travelling time: This indicates the
hours (h) and minutes (min) since the ig-
nition was switched on.
Range: Approximate distance in km that
can still be travelled if the same driving
style is maintained.
–
–
–
–
AdBlue range or : Approximate
distance in km that can still be travelled
with the current level of the AdBlue®
tank with the same driving style. The in-
dication appears from a range of less
than 2,400 km and cannot be deactiva-
ted.
1)
Distance: Distance covered in km (m)
after switching on the ignition.
Average speed: The average speed
will be shown after driving for approxi-
mately 100 metres.
FAS: Reduced assistant indication.
Oil and coolant temperature indication
(only with digital instrument panel)
The engine reaches its operating tempera-
ture when, under normal driving conditions,
the oil temperature is between 80°C (176°F)
and 120°C (248°F). If a great effort is required
from the engine and the outside temperature
is high, the engine oil temperature may in-
crease. This does not present any problem as
long as the warning lamps or
›››
page 331 do not appear on the display.
–
–
–
–
Warning and information messages
(Vehicle status)
The system runs a check on certain compo-
nents and functions when the ignition is
s
witched on and while the vehicle is moving.
Faults are displayed on the instrument cluster
display as red and yellow warning symbols
2)
accompanied by messages and, depending
on the case, even an audible warning
›››
page 87. The representation of the mes-
sages and symbols may vary depending on
the version of the instrument panel.
Existing faults can also be checked manually.
To do so, open the menu Vehicle info
›››
page 92.
Priority 1 warning (red)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Stop
driving! Danger! Check the fault and elimi-
nate the cause. If necessary, seek professio-
nal assistance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
1)
Not available in all countries.
2)
With an analogue instrument panel, the warn-
ings ar
e always shown in white.
74
Loading ...
Loading ...
Loading ...