Loading ...
Loading ...
Loading ...
Battery
Short flashes: Programmed charging is
activ
e. The charging process has not yet
started.
Yellow LED
›››
Fig. 215:
Turn signals: The parking lock P has not
been enabled.
Always on: No electrical network has
been detected. Arrange an inspection of
the power supply and network. Seek pro-
fessional assistance.
Red LED
›››
Fig. 215:
Turn signals: Error in the charging system.
The charging process cannot start or has
paused.
Always on: The charging connector has
not been locked. Unplug the charging
connector and plug it back in to the
charging socket, making sure it is proper-
ly inserted. If the problem persists, check
the compatibility of the cable or ask a
professional for help.
Charging socket lighting
In the dark, the charging socket's side lighting
(white LED) can facilitate orientation in the
vehicle:
Ignition
●
The vehicle has been unlocked.
●
OR: The charging connector has been un-
plugged from the charging socket.
3
4
5
6
Off
●
After unlocking or locking the vehicle, the
lighting s
witches off automatically after a
while.
Note
If the charging process display permanent-
ly indicat
es an error in the power supply or
vehicle’s charging system, you should seek
professional assistance.
Troubleshooting
3 V
alid for: hybrid vehicles
Error in the electric drive system
The warning lamp lights up red. You must
park the vehicle in a safe place.
The corresponding error message is dis-
played on the instrument cluster display.
Fault in the electric drive system. The high
voltage components may be damaged
›››
.
●
Park the vehicle outdoors as soon as it is
possibl
e and safe to do so.
●
Switch off the drive system.
●
Seek professional assistance.
The charging process is not possible or
has been paused
An error may be displayed on the instrument
cluster display or on the charging socket’s
charging process display.
You can try the following to solve the problem
before seeking professional assistance:
●
Unlocking the charging connector and plug
the charging cable in again.
●
OR: Make sure that the charging settings
are as desired: “immediate” or “program-
med”.
●
OR: Check if the charging connector is
properly plugged in.
●
OR: Check if a fault is displayed on the
charging station or, depending on the fea-
tures, on the displays of the mode 2 charging
cable.
If the fault cannot be rectified, seek professio-
nal assistance directly.
WARNING
High-voltage components, including the
batt
ery and high-voltage cables, may be
live and damaged. The high voltage system
voltage is dangerous and can cause burns,
other injuries and fatal electric shocks.
●
Do not touch the high voltage compo-
nents!
312
Loading ...
Loading ...
Loading ...