Loading ...
Loading ...
Loading ...
6
Physical Installation
This device operates on either a Wi-Fi connection or direct connection to your network with an
Ethernet cable. This is not a power over ethernet (PoE) device and will require a 5V, 1.0A
microUSB power connection to function. Please use only applicable voltage when powering the
camera. Any excessive voltage could damage the integrity of the camera. It is highly recommended
to use the included power cable and adapter to power the camera.
The ASH21 camera is not waterproof. Please avoid installing the camera is areas of high humidity or
moisture as it may cause water damage to the camera. It is recommended not to install the camera
in an outdoor environment.
If you are using a microSD card for local storage, please ensure the microSD card is properly
installed before physically installing your camera. Before you begin, ensure the installation surface
can support at least 3x the weight of the device. For more information on how to install your
camera, please refer to the information below.
Provided with your ASH21 camera is an installation/mounting plate which allows you to install the
camera onto a mounting surface such as ceilings or other flat surfaces. Included with your camera are:
• 3 Mounting Screws
• 3 Wall Anchors
• Installation Mounting Plate
• Installation Map Sticker
The physical installation of your camera will involve the following tools(not included):
• A drill (optional)
• Phillips head screwdriver
Installation Instructions
• Peel and place the installation map sticker onto the mounting surface.
• Using a drill, drill the installation holes on the installation map sticker, then insert the
included wall anchors into the 2 drilled holes. The third wall anchor can be used as a spare if needed.
• Place the included installation mounting plate (face down) on the installation map sticker
and use a Phillips head screwdriver to secure the installation mounting plate to the mounting surface.
• On the base of the camera you will notice 2 slots for the installation plate.
• Place the camera perpendicular and flush onto the installation mounting plate and twist the base the
camera to secure it to the installation mounting plate. The camera will click and lock into place
completing the physical installation.
Loading ...
Loading ...
Loading ...