Loading ...
Loading ...
Loading ...
General information
The stationary climate control can be
switched on and off directly or via a preset
departure time:
– Direct operation, refer to page 197.
– Preselected departure times, refer to
page 197.
The air automatically exits through the
vents to the windshield, the side windows,
the upper body region and into the floor
area.
The system switches off automatically after
a certain period of time.
If stationary climate control is used during
the charging process, less air conditioning
capacity will be required while driving. This
optimizes the range.
Functional requirements
– The drive-ready state is deactivated.
– The high-voltage battery is sufficiently
charged or the charging cable is con-
nected.
If the high-voltage battery is heavily dis-
charged, it can take some time after con-
necting the charging cable, until the sta-
tionary climate control will be
functional.
– With direct operation or preset depar-
ture time: depending on inside, outside
and set desired temperature.
Make sure that the vehicle's date and
time are set correctly.
– To ensure the minimum range of the ve-
hicle, the stationary climate control may
be automatically switched off, for in-
stance after repeated activation or due
to an insufficient state of charge of the
high-voltage battery. After the station-
ary climate control is switched off due
to an insufficient state of charge, charge
the high-voltage battery and switch the
drive-ready state on and off. The station-
ary climate control is available again.
– The vents of the ventilation are open to
allow air to flow out.
Switching on/off directly
Concept
The system can be switched on or off di-
rectly.
The system switches off automatically after
a certain period of time.
Via the Central Information Display
(CID)
The system can be switched on or off via
the Central Information Display (CID).
1. "My MINI"
2. "Vehicle settings"
3. "Climate functions"
4. "Activate comfort climate"
5. "Activate now"
Climate control for departure time
Concept
Different departure times can be preset to
ensure a comfortable interior temperature
in the vehicle at the time of departure.
The activation time is automatically deter-
mined based on the temperature.
The system promptly switches on before the
selected departure time.
The departure time is preselected in two
steps:
– Set departure times.
– Activate departure times.
Setting the departure time
Via the Central Information Display (CID):
Seite 197
Climate control CONTROLS
197
Online Edition for Part no. 01405A2C300 - II/21
Loading ...
Loading ...
Loading ...