Loading ...
Loading ...
Loading ...
the vehicle may begin to move. Also Set
parking brake, refer to page 109.
Engaging selector lever positions
General information
– Interlock: the selector lever position P
can be exited only with drive-ready
state engaged.
– Shift lock: with the vehicle stationary,
press on the brake pedal before shifting
out of P or N; otherwise, the shift com-
mand will not be executed.
– Shift lock: before shifting out of P, re-
move the charging cable from the vehi-
cle; otherwise, the shift command will
not be executed.
Engage D, N, R
A selector lever lock prevents the following
faulty operation:
– Unintentional shifting into selector
lever position R.
– Unintentional shifting from selector
lever position P into another selector
lever position.
1. Press and hold the button to release the
selector lever lock.
2. With the driver's safety belt fastened,
briefly push the selector lever in the de-
sired direction, past a resistance point,
if needed. The selector lever automati-
cally returns to the center position when
released.
Engaging P
Press button P.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is to roll
without its own power for a short distance,
for instance in a car wash, or be pushed.
Engaging selector lever position N
NOTICE
Selector lever position P is automatically
engaged when standby state is switched
off. There is a risk of damage to property,
among other potential damage. Do not
switch standby state off in car washes.
Seite 105
Driving CONTROLS
105
Online Edition for Part no. 01405A2C300 - II/21
Loading ...
Loading ...
Loading ...