Loading ...
Loading ...
Loading ...
Removing & Installing Body Components u Battery
96
Maintenance
Battery
❙
Removal
Make sure the ignition switch is off.
1.
Remove the left inner panel. 2 P. 88
2.
Remove the battery holder by removing
the bolt.
3.
Disconnect the negative - terminal from
the battery.
4.
Disconnect the positive + terminal from
the battery.
5.
Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Readjust the clock after the battery is
reconnected since the clock goes wrong
once the battery disconnected.
For proper handling of the battery, see
“Maintenance Fundamentals.“
2 P. 77
Battery Goes Dead 2 P. 140
Bolt
Battery holder Negative terminal
BatteryPositive terminal
14 CTX1300 A-31MJN6000.book 96 ページ ２０１３年１２月１８日 水曜日 午前９時３７分
Loading ...
Loading ...
Loading ...